Where is the main shut-off in a typical local house?
Usually two places are worth knowing: a valve where the supply enters the building, often near a hose bib or in the garage, and the utility's valve in a box at the property line. Either will stop the flow. The box valve generally needs a meter key, which is worth owning before you need one.
Find yours on a dry afternoon and turn it, both to learn where it is and to find out whether it still moves. A valve untouched for fifteen years can be stiff, and discovering that while standing in water is a bad time to learn it. If it does not turn easily, that is a job for a plumber now rather than an emergency later.
Tell everybody in the household. The person who happens to be home when a connector fails is not necessarily the person who read this page, and a note on the inside of a cupboard door with the valve location and the panel layout costs nothing and occasionally saves a floor.
- Locate and turn the main shut-off before you ever need it
- Keep a meter key or the right wrench somewhere findable in the dark
- Label the breaker panel by room, including the laundry and the kitchen
- Write the valve location where anyone in the household can find it
Why does the power go off before the water comes out?
Because water at floor level is at the same height as outlets, appliance feeds and floor boxes, and the person most at risk is whoever walks in first with a bucket. Switching the affected circuits off at the panel removes that risk, and it costs nothing but the inconvenience of a dark room.
The specific hazards are mundane and consistent: an extension lead lying in water, a floor box in a living area, the base of a washer or a refrigerator, a garage freezer. None of those is obviously dangerous to look at, which is precisely the problem. Breakers off at the panel handles all of them at once.
Where the panel itself is wet, or where water has reached a service entrance, that is not a household job at all. Keep away from it, keep everyone else away, and call the utility. The same applies to a gas appliance that has stood in water: nobody relights it, and the gas valve stays off.
What does board-up actually mean here?
Making a building weather-tight and secure after it has been opened: covering a hole, boarding a broken window or a door that will not lock, sheeting an opening so the next storm does not add to the damage. It is temporary by design, and it exists to protect what has not yet been damaged.
In a winter storm sequence this is often the most valuable work done in the first day. Fronts arrive every few days, so a building left open after the first one takes everything the second one delivers. A temporary cover that lasts a week buys the time to get the right trade to the permanent repair.
Security matters as well as weather. An empty building with an open wall or a door that will not lock is exposed in more ways than one, particularly where a household has had to move out while the drying runs. Securing it is part of protecting the property, which is also what most policies expect of you.
What should you tell whoever answers the phone?
Where the water is coming from if you know, whether it is still arriving, whether the main is closed, whether the power in that area is off, and roughly how many rooms are affected. That is enough to send the right crew with the right equipment rather than sending a van to look.
It also helps to say what kind of water it is. Supply water, rain water and anything from a drain are three different jobs with different equipment and different protective gear, and the difference is better established on the phone than discovered on arrival.
Phones for water emergencies here are answered at any hour, and a crew is dispatched as fast as one becomes available. Nobody can promise an arrival time, and anybody who does is guessing. What can be done on the call is to tell you what to do in the meantime, which is usually the three things at the top of this page.